Parts Sourcing & Field Service
When a hardware fault threatens the availability of a supported NetApp storage environment, Kelri coordinates the technical diagnosis, replacement-part sourcing, and—where contracted—onsite labor needed to return the system to a known-good state. We use a disciplined independent-maintenance model: clear part condition, configuration validation before shipment, and practical field execution. Kelri helps you preserve the value of your installed storage investment; we do not claim to be an OEM parts channel or a substitute for NetApp software entitlements.
How Kelri Sources Replacement Parts
Kelri sources replacement components through reputable secondary-market and OEM-surplus channels. Components are selected against the required part number, compatible configuration, and fault diagnosis—not simply on availability.
Before dispatch, each replacement part is function-tested to the extent practical for the component and supply channel. Kelri discloses condition as tested-used or refurbished, as applicable. We do not represent secondary-market components as new OEM parts unless that status has been independently verified and documented for the specific item.
Quality and verification standard
For every replacement request, Kelri will aim to verify:
- The affected system, controller, shelf, or appliance model.
- The applicable part number, revision, and interface or form-factor requirements.
- Drive type, capacity, performance class, sector format, and compatibility considerations where relevant.
- Firmware and configuration dependencies identified during diagnosis.
- The part's tested-used or refurbished condition before shipment.
A replacement part can address a hardware fault; it does not by itself establish that the full environment is current, supported by the OEM, licensed, or free of separate configuration issues.
Part Condition and Coverage
Replacement components are supplied as tested-used or refurbished unless a written quote says otherwise. The condition of each replacement component is disclosed in the applicable quote before it ships.
Any coverage on a replaced component — its scope, duration, remedy, return procedure, and any advance-replacement rules — is confirmed in writing for each engagement in the applicable quote or customer agreement. Coverage applies to a verified failure of the supplied part under normal supported use and does not extend to unrelated system faults, compatibility issues caused by inaccurate configuration information, improper installation, environmental damage, misuse, unauthorized modification, or failures outside the supplied component.
Serial Number and Configuration Validation Before Shipping
Kelri validates the replacement request before authorizing shipment. Customers should provide the affected unit serial number, platform model, relevant part number, current configuration details, diagnostic output, ship-to contact, and site access constraints.
This validation step helps prevent avoidable mismatches—for example, a drive with the wrong capacity or sector format, a power supply that does not match the enclosure, or a controller that does not match the supported configuration. If the available information is incomplete, Kelri may pause dispatch while the assigned engineer confirms the requirement.
Spares and Sourcing Model
Kelri's spares approach combines targeted forward stock with direct shipment, scoped to each customer engagement:
- High-failure-rate components—such as commonly used drives and power supplies—may be held as forward stock through qualified field-service or logistics partners where an engagement justifies it.
- Lower-frequency, specialized, or configuration-specific components are generally sourced and shipped directly after technical validation.
- Customer-dedicated spares or a site-specific stocking plan may be arranged by agreement where the supported footprint and anticipated demand justify it.
Forward-stock availability, cut-off times, inventory levels, carrier options, and delivery expectations vary by component and location. No specific depot location, inventory quantity, or delivery time is promised unless expressly written into the customer agreement.
Chain of Custody and Failed Media Handling
Data-bearing devices require a different process from ordinary return parts. Kelri will document the disposition path for returned components and coordinate secure packaging, shipment, and receipt for eligible returns.
Customers may elect one of the following approaches for failed drives and other data-bearing media, subject to the agreed commercial terms and local service availability:
- Customer retention: the customer retains the failed media and Kelri supplies a replacement where the agreement permits.
- Certified destruction coordination: Kelri coordinates a documented destruction option through a qualified provider under the agreed commercial terms.
- Secure return: the customer returns the failed media using the agreed chain-of-custody and shipping instructions.
Customers remain responsible for deciding whether media may leave their control and for applying their data-security policies. For regulated workloads, address drive-retention and destruction preferences during onboarding—not during an outage.
Onsite Labor Model
Kelri provides remote technical direction by default. When onsite work is included, Kelri coordinates a qualified field-service subcontractor or partner network. The field technician performs the agreed physical work—such as component replacement, cabling checks, or hardware observation—while Kelri's engineers retain technical case ownership and guide the diagnostic or remediation plan.
Onsite work is subject to confirmed regional coverage, technician availability, site access and safety requirements, customer badging or background-check rules, and the specific skills required for the task. Kelri identifies the applicable labor scope and any separately quoted travel, waiting-time, or after-hours charges before dispatch where circumstances allow. These terms are confirmed in writing for each engagement.
Dispatch and Escalation Workflow
- 1
Open a case.
The customer reports the issue through the agreed support channel and provides business impact, system identification, diagnostic information, and onsite contact details.
- 2
Diagnose and validate.
An Kelri engineer assesses the fault and validates whether a part, onsite labor, or both are appropriate.
- 3
Confirm the service path.
Kelri confirms the approved part, shipping destination, access constraints, and whether onsite support is included. Any field-partner dispatch is subject to the confirmed service territory and partner availability.
- 4
Authorize and dispatch.
The part is released from the selected source or depot, and an onsite work order is coordinated when applicable.
- 5
Install and verify.
The onsite technician, customer team, or both complete the physical work under the agreed process. Kelri guides validation, recovery checks, and case documentation.
- 6
Close or escalate.
Kelri documents the outcome. If the issue persists or the scope changes, the case remains open and follows the support escalation process.
Geographic Availability
Remote technical support is the default model for supported customers regardless of location, subject to the customer's service agreement.
Onsite parts and field service are coordinated through qualified logistics and field-service partners. Onsite availability is not implied by remote support; the applicable service territory, coverage, and dispatch terms for a given site are confirmed in writing for each engagement.
Controller Replacements, Software, and License Entitlements
A controller replacement can be a technically appropriate hardware action, but it does not create or transfer NetApp software rights. Kelri cannot issue new NetApp software licenses, transfer NetApp license entitlements, provide OEM firmware entitlements, or authorize access to NetApp-only support resources.
This boundary is deliberate scope clarity. Customers are responsible for maintaining the NetApp licenses, software rights, firmware access, and OEM contractual entitlements required for their environment. Before controller replacement, Kelri will identify known configuration, licensing, and entitlement dependencies so the customer can confirm its readiness.
Secure Return, Sanitization, and Disposal
Kelri can coordinate a secure return or disposal path for eligible components. The process uses documented handling, tracked shipment where applicable, and disposition records appropriate to the selected option.
For data-bearing media, customers may choose retention or a sanitization/destruction path. Where sanitization is included, the process is intended to align with the media-specific guidance in NIST SP 800-88 Rev. 1. This is a process description, not a claim that Kelri is certified by NIST or that every third-party provider holds a particular certification.
Final sanitization method, certificate or record type, chain-of-custody requirements, and disposal provider depend on the media, geography, customer policy, and the agreed service scope, and are confirmed in writing for each engagement.
Plan before the hardware event
The best time to define replacement options, media-retention preferences, and onsite access is before an incident. Share your supported NetApp footprint and we'll help define a practical parts and field-service model.